Skip to content

Home Concrete steps

Concrete Steps Calculator in 3D

Build a solid set of concrete steps in 3D, then see the volume as cubic yards, cubic meters, and bags. Add an optional solid landing behind the top tread and set your own order allowance.

Explore This Calculator

Measure the Solid

Every riser has its own tread in this model. Extra landing length is added behind the top tread.

Concrete Steps Calculator in 3D with measured dimensionsDrag to Rotate

Each tread block extends all the way down to the base. The extra landing starts behind the final tread.

Concrete to Order2.091 yd³
Metric Order Volume1.599 m³
Net Solid Volume51.33 ft³

Order quantity includes the allowance below. Net volume is the exact modeled solid before allowance.

Net 1.901 yd³ × 1.1 = 2.091 yd³ to order

Ready-Mix or Bags?

Whole Bags at Entered Yield95
Bag Material CostEnter Rate
Ready-Mix Material CostEnter Rate

The initial yield of 0.60 ft³ is an example for an 80 lb standard concrete-mix bag. Replace it with your product’s stated mixed yield. Costs exclude delivery, short-load fees, labor, reinforcement, and forms.

Count the Blocks, Then Add the Landing

Starting at the lowest tread, the blocks have heights r, 2r, 3r, and so on. Their depths are equal. The landing is a separate rectangular block at full stair height.

Solid Section Height Concrete Volume
Tread Block 1 0.58 ft 2.33 ft³
Tread Block 2 1.17 ft 4.67 ft³
Tread Block 3 1.75 ft 7 ft³
Tread Block 4 2.33 ft 9.33 ft³
Extra Landing 2.33 ft 28 ft³
Total Rise2.33 ft
Full Footprint Length7 ft
Concrete Steps Calculator · Separate Blocks Concrete Steps Calculator · Separate Blocks Current geometry · Use the 3D dimension labels for measurements

Steps = w × d × r × n(n + 1) ÷ 2
Landing = w × l × n × r

w = width; d = tread depth; r = riser height; n = riser count; l = extra landing length. Keep dimensions in one unit before multiplying.

Match the Model to the Pour

What if there is compacted fill under the steps?

This calculation includes concrete in that space. Measure and deduct a known core volume separately, or use a design that explicitly models the intended slab and core. A flat percentage deduction does not describe a specific hollow stair shape.

Why round the bag count upward?

Bag yield is a volume of mixed concrete. Divide the order volume by the yield, then round upward to the next complete bag. Product yield and placement losses can vary.

This model is solid concrete down to a flat base under every tread and the landing. It does not subtract a gravel core or calculate a suspended stair slab. Footings, reinforcement, frost depth, formwork, handrails, and structural design are outside this quantity estimate.